Our Electro-static Discharge Immunity test setup can provide up to 8 kV of contact discharge and 15 kV of Air discharge covering a wide variety of family product requirements.

Pictured to the left is our BiconiLog antenna used for Radiated RF Immunity testing to EN 61000-4-3 and for prescanning of products to Radiated Emissions standards such as FCC Part 15, IC ES 003 and EN 55022:1994. The chamber can generate fields up to 10 volts per meter and has been calibrated per the uniform field requirements of EN 61000-4-3 at 3 and 10 volts per meter.

The Electrical Fast Transient test system can provide up 4 kV on single phase 230 Volt 16 Amp mains power and up to 2 kV via a coupling clamp onto I/O cables.

Surge Immunity onto Mains powered single phase 230 VAC, 16 Amp devices can be applied up to 4 kV and I/O cables can be surged up to 2 kV via a coupling network.

Voltage Dips and Short Interruptions 0 to 100 % onto Mains powered single phase 230 VAC, 16 Amp devices.

A Transverse Electro-Magnetic (TEM) Cell is an open stripline that maintains its characteristic impedance throughout its volume. Electrical and magnetic fields from 150 kHz to 150 MHz.